Reset the Huawei E5770

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Huawei E5770 router back to factory default settings. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:

  • The router's username and password are reset.
  • All WiFi login information and network names are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.

Other Huawei E5770 Guides

This is the reset router guide for the Huawei E5770. We also have the following guides for the same router:

Recover Password in Huawei E5770

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Huawei E5770

Most routers have a small button on either the back or the bottom. Look at your router and try to find something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Keep in mind that this will completely reset your Huawei E5770 router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Huawei E5770

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our E5770 Login Guide has all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Huawei E5770 Guides

If you want additional help with your Huawei E5770 be sure to check out some of our other guides.

This is the reset router guide for the Huawei E5770. We also have the following guides for the same router: