This article covers how to reset the Huawei E5885Ls-93a router back to factory default settings. This is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:
- The router's username and password are reset.
- All WiFi settings are reset, including network name and password.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Huawei E5885Ls-93a Guides
This is the reset router guide for the Huawei E5885Ls-93a 21.191.69.01.1133 Zain. We also have the following guides for the same router:
Recover Password in Huawei E5885Ls-93a
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Huawei E5885Ls-93a
Most of the time you can find a small reset button located on either the back or the bottom of a router. Look for something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not worry about holding the button down too long; this is harmless.
Just don't forget that this will totally reset your Huawei E5885Ls-93a router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Huawei E5885Ls-93a
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our E5885Ls-93a Login Guide has all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Huawei E5885Ls-93a Guides
We have collected a lot of information about the Huawei E5885Ls-93a router. You can find some of our additional content here.
This is the reset router guide for the Huawei E5885Ls-93a 21.191.69.01.1133 Zain. We also have the following guides for the same router: