This is the reset guide for the Huawei E5885Ls-93a router. Resetting a router is different than rebooting a router. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.
- The router's username and password are reset.
- Your WiFi login, password, and network name are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Huawei E5885Ls-93a Guides
This is the reset router guide for the Huawei E5885Ls-93a 21.182.63.00.1217. We also have the following guides for the same router:
Recover Password in Huawei E5885Ls-93a
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Huawei E5885Ls-93a
You can usually find a small reset button on either the back or the bottom of a router. Look for something that looks like this:
Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You can hold the button down as long as you like, it will not hurt anything.
Don't forget, this step will totally reset your Huawei E5885Ls-93a router back to factory settings.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Huawei E5885Ls-93a
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can follow the E5885Ls-93a Login Guide to find everything that you need to log in.
Change Your Password
Do not forget to change your router's default password when you log back into it. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Huawei E5885Ls-93a Guides
If you want additional help with your Huawei E5885Ls-93a be sure to check out some of our other guides.
This is the reset router guide for the Huawei E5885Ls-93a 21.182.63.00.1217. We also have the following guides for the same router: