Reset the Huawei EchoLife HG8245U

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Huawei EchoLife HG8245U router back to factory default settings. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:

  • The router's username and password are reset.
  • All WiFi login information and network names are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Huawei EchoLife HG8245U Guides

This is the reset router guide for the Huawei EchoLife HG8245U V3R017C10S125. We also have the following guides for the same router:

Recover Password in Huawei EchoLife HG8245U

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Huawei EchoLife HG8245U

Most of the time you can find a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Remember, this will erase everything you have previously done to this Huawei EchoLife HG8245U router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Huawei EchoLife HG8245U

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our EchoLife HG8245U Login Guide to find all of the information that you need.

Change Your Password

Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Huawei EchoLife HG8245U Guides

We have collected a lot of information about the Huawei EchoLife HG8245U router. You can find some of our additional content here.

This is the reset router guide for the Huawei EchoLife HG8245U V3R017C10S125. We also have the following guides for the same router: