If you have been trying to login to the Inteno DG150B router and been unable to do so you might need to consider a reset. A reset like this one is not the same thing as a reboot. When you reboot a router you cycle the power to the device. When you reset a router you take all the settings you have changed and reverts them back to how they were from the factory.
Warning: Resetting the router is a big step and should be taken seriously. We recommend creating a list of the possible settings that have been changed in the past. Some of the most common settings are:
- The router's main username and password.
- The WiFi username and password.
- Any port forwards you have created or IP addresses you have changed.
- If this is a DSL router you need to re-enter the Internet Service Provider (ISP) username and password. You need to do this in order to use the Internet again. Call your local ISP for the details.
Other Inteno DG150B Guides
This is the reset router guide for the Inteno DG150B. We also have the following guides for the same router:
- Inteno DG150B - Inteno DG150B User Manual
- Inteno DG150B - Inteno DG150B Login Instructions
- Inteno DG150B - How to change the IP Address on a Inteno DG150B router
- Inteno DG150B - How to change the DNS settings on a Inteno DG150B router
- Inteno DG150B - Setup WiFi on the Inteno DG150B
- Inteno DG150B - Inteno DG150B Screenshots
- Inteno DG150B - Information About the Inteno DG150B Router
Reset the Inteno DG150B
Below is an image of the back panel of the Inteno DG150B router. Notice where the reset button is located. I have circled it for you in red.
While the router remains on take a straightened paperclip and press down on the reset button for about 10 seconds. If you don't hold this reset button down for the entire 10 seconds you might end up only rebooting the router instead of resetting it like you wanted.
Warning: Do not unplug or turn off the router during the reset process. If you do you may end up permanently damaging the device.
Remember a reset like this one is going to erase every single setting you have ever changed on this device. We strongly recommend trying other methods of troubleshooting before you continue.
Login to the Inteno DG150B
Following that you'll want to log into your router. This is done by using the factory default username and password. If you're not sure where to find these, don't panic. We have them listed for your use in our Login Guide.
Tip: Defaults not working for you? It might be because the reset button wasn't held down for long enough.
Change Your Password
Now that you've logged into your router we suggest setting a new password for it. This can be whatever you like, however keep in mind that a strong password is 14-20 characters in length. For more help be sure to take a look through our Choosing a Strong Password Guide.
Tip: Prevent yourself from losing your new password by writing it on aj slip of paper and taping it to the bottom of your router.
Setup WiFi on the Inteno DG150B
When you are finished with all of that you need to begin the reconfiguration process. This needs to include the WiFi settings. For a great guide on the topic read our Inteno DG150B WiFi Instructions.
Inteno DG150B Help
Be sure to check out our other Inteno DG150B info that you might be interested in.
This is the reset router guide for the Inteno DG150B. We also have the following guides for the same router:
- Inteno DG150B - Inteno DG150B User Manual
- Inteno DG150B - Inteno DG150B Login Instructions
- Inteno DG150B - How to change the IP Address on a Inteno DG150B router
- Inteno DG150B - How to change the DNS settings on a Inteno DG150B router
- Inteno DG150B - Setup WiFi on the Inteno DG150B
- Inteno DG150B - Inteno DG150B Screenshots
- Inteno DG150B - Information About the Inteno DG150B Router