Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Inteno FG500

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This guide will show you how to properly reset the Inteno FG500 router back to the default settings.

There is some confusion about what a reset is. A reset is not a reboot. When you reboot a router you cycle the power to the device only. No settings are changed. When you reset a router, it takes all the settings you have ever changed and erases them. It then reverts them all back to how they were from the factory.

Warning: Resetting the router is a big step and should not be taken lightly. We recommend making up a list of all the settings you have ever changed in the past. This will include settings such as:

  • The router's main username and password.
  • The wireless settings such as SSID and password.
  • If this is a DSL router you need to re-enter the ISP (Internet Service Provider) username and password. Call your ISP for the details.
  • If you have made any other changes go ahead and write them down as well.

Other Inteno FG500 Guides

This is the reset router guide for the Inteno FG500. We also have the following guides for the same router:

Reset the Inteno FG500

Looking at the image below you should see the reset button circled in red.

router reset factory settings
This is the reset page from your Inteno FG500 router.

While the router is on take a straightened paperclip and press down on the reset button for about 10 seconds. This begins the reset process. If you don't happen to hold the reset button down for the entire 10 seconds you might end up only rebooting the router instead of resetting it like you intended.

Warning: Do not unplug or turn off the router during the reset process. Doing so could result in permanent damage to the device.

Don't forget a reset like this one is going to erase every single setting you have ever changed in the history of the device. We strongly recommend trying other troubleshooting methods before deciding on a reset as your best course of action.

Login to the Inteno FG500

Now that you've successfully reset the Inteno FG500 router you'll want to log into it. This is done by using the factory default username and password. We have these provided for your use in our Login Guide.

Tip: Defaults not logging you in? Try holding the reset button down for longer.

Change Your Password

After you've reset and logged into your router we recommend setting a new password for your router. Keep in mind that this password will only protect your router settings, not your wireless network. All the same, setting a strong password is always a good idea. For more help be sure to take a look through our Choosing a Strong Password Guide.

Tip: Avoid losing your new password by writing it on a slip of paper and attaching it to the bottom of your router.

Setup WiFi on the Inteno FG500

Finally it is time to reconfigure the router to your liking. We highly recommend using our Inteno FG500 WiFi Instructions for easy-to-follow directions.

Inteno FG500 Help

Be sure to check out our other Inteno FG500 info that you might be interested in.

This is the reset router guide for the Inteno FG500. We also have the following guides for the same router: