Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Intracom NetFasteR WLAN

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page I will be showing you how to properly reset the Intracom NetFasteR-WLAN router. There is confusion on the difference between a reset and a reboot. When you reboot a router you cycle the power to the unit. No settings are changed. When you reset a router you take all the settings and return them to factory defaults. This means every single setting you have ever changed is erased and returned to factory defaults.

Warning: Resetting the Intracom NetFasteR-WLAN router is a big step and should not be taken lightly. We strongly recommend trying other methods of troubleshooting before you continue. It's also a good idea to create a list of all the settings you may of changed in the past. Some of the more common settings are:

  • The router's main username and password.
  • The WiFi SSID and password.
  • If you own a DSL router you need to re-enter the Internet Service Provider (ISP) username and password. You need to call your ISP for these details.
  • Have you ever forwarded a port or changed an IP address? If you have they will be erased as well.

Other Intracom NetFasteR WLAN Guides

This is the reset router guide for the Intracom NetFasteR WLAN. We also have the following guides for the same router:

Reset the Intracom NetFasteR WLAN

Below is an image of the back panel of the Intracom NetFasteR-WLAN router. Take a look at where the reset button/pinhole is located. I have circled it for you in red.

router reset factory settings
This is the reset page from your Intracom NetFasteR WLAN router.

While the router is on take a straightened paperclip and press down on the reset button for about 10 seconds. This starts the reset process which can take a minute or more to complete. If you don't hold the reset button down long enough you might end up only rebooting the router instead of resetting it.

Warning: DO NOT unplug or turn off the reset button during the reset process. This could irreparable damage to the router.

Don't forget a reset like this is erasing every single setting you have ever changed in your router's lifetime. We strongly recommend trying other methods of troubleshooting first.

Login to the Intracom NetFasteR WLAN

Now that you've successfully reset the Intracom NetFasteR-WLAN router you need to log into it. This is accomplished by using the factory default username and password. Not sure where you can find these? We have them provided for your use in our Login Guide.

Tip: If the defaults aren't working for you it might be because the reset button wasn't held down for long enough.

Change Your Password

Following that we suggest setting a new password for your router. This can be whatever you like, however keep in mind that a strong password includes no personal information and is 14-20 characters in length. For more help be sure to take a look through our Choosing a Strong Password Guide.

Tip: Keep yourself from losing your new password by writing it on a slip of paper and attaching it to the bottom of your router.

Setup Wifi on the Intracom NetFasteR-WLAN

After you've reset the Intracom NetFasteR-WLAN router, we recommend putting all your settings back how you like them. A good place to start with that is the WiFi settings. To make it easy, feel free to follow our WiFi Instructions.

Intracom NetFasteR WLAN Help

Be sure to check out our other Intracom NetFasteR WLAN info that you might be interested in.

This is the reset router guide for the Intracom NetFasteR WLAN. We also have the following guides for the same router: