If you need to reset your Jensen Scandinavia AL3000DG router back to factory settings, then this article shows you how. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. A Router Reset completely erases the router and returns it to factory settings.
Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:
- The router's login credentials are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Jensen Scandinavia AL3000DG Guides
This is the reset router guide for the Jensen Scandinavia AL3000DG v2. We also have the following guides for the same router:
Recover Password in Jensen Scandinavia AL3000DG
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Jensen Scandinavia AL3000DG
You can usually find a small reset button on either the back or the bottom of a router. What you are looking for is something that looks like this:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Just don't forget that this will totally reset your Jensen Scandinavia AL3000DG router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Jensen Scandinavia AL3000DG
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. We have a AL3000DG Login Guide with all this information ready for you.
Change Your Password
You need to change your router's default password after you log in for the first time. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Jensen Scandinavia AL3000DG Guides
If you want additional help with your Jensen Scandinavia AL3000DG be sure to check out some of our other guides.
This is the reset router guide for the Jensen Scandinavia AL3000DG v2. We also have the following guides for the same router: