Setup Router logo in white Setup router name logo in white
Get Software

Reset the Legrand On-Q 364772-02-V1

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

In this article, you will learn how to reset your Legrand On-Q 364772-02-V1 back to factory settings. A router reset is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.

  • The router's username and password are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Legrand On-Q 364772-02-V1 Guides

This is the reset router guide for the Legrand On-Q 364772-02-V1. We also have the following guides for the same router:

Recover Password in Legrand On-Q 364772-02-V1

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Legrand On-Q 364772-02-V1

Most routers have a small button on either the back or the bottom. This is what a typical reset button looks like:

Router Reset Button

Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The lights on the front of the router should do something different when the reset happens. It is harmless to hold the reset button too long.

Just don't forget that this will totally reset your Legrand On-Q 364772-02-V1 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Legrand On-Q 364772-02-V1

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our On-Q 364772-02-V1 Login Guide.

Change Your Password

After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Legrand On-Q 364772-02-V1 Guides

We have collected a lot of information about the Legrand On-Q 364772-02-V1 router. You can find some of our additional content here.

This is the reset router guide for the Legrand On-Q 364772-02-V1. We also have the following guides for the same router: