How to Reset the Linksys AG241

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

Have you tried to login to the Linksys AG241 router without success? It might be time to consider a reset. A reset is not the same thing as a reboot. When you reboot a router you are simply cycling the power to the unit. When you reset the router you are doing a full restore of all the settings back to factory.

Warning: Resetting the router is a big step and should not be taken lightly. We strongly recommend trying other troubleshooting methods before you continue. It's also a good idea to make a list of any possible settings you have changed in the past. These could include settings such as:

  • the router's main username and password.
  • any port forwarding you have done in the past.
  • any IP addresses you have changed.
  • parental controls you have in place.

Other Linksys AG241 Guides

This is the reset router guide for the Linksys AG241. We also have the following guides for the same router:

Reset the Linksys AG241

Below is an image of the back panel of the Linksys AG241 router. Take a look at where the reset button/pinhole is located.

router reset factory settings
This is the reset page from your Linksys AG241 router.

While the router is on take a straightened paperclip or other similar object and press down on the button/pinhole for approximately 10 seconds. This starts the reset process which can take several minutes to complete. If you don't hold the reset button down for long enough you might end up simply rebooting the device instead of resetting it like you wanted.

Warning: Do not unplug or turn off the router during this process. Doing so may result in permanent damage to the device.

Don't forget a reset like this one is going to erase every single setting you have ever changed in the past. We strongly advise that you try other methods of troubleshooting first.

Login to the Linksys AG241

It is now time to login to the Linksys AG241 router. After a reset is complete you need to use the default username and password. Remember all settings have been erased. We have accumulated all the default usernames and passwords. Check out the default Linksys AG241 passwords in our Linksys AG241 Login Guide.

Tip: Don't panic if the default values didn't work. It is possible you didn't hold the reset button down for long enough. Try again but hold the reset button down for a bit longer.

Change Your Password

Always change the default passwords. These are not meant to be strong they are meant to be easy to remember. Change this immediately. If you need some help check out our Choosing a Strong Password guide.

Tip: One way to avoid losing this password is to write it down on a slip of paper and attach it to the bottom of the device for future reference.

Linksys AG241 Help

Be sure to check out our other Linksys AG241 info that you might be interested in.

This is the reset router guide for the Linksys AG241. We also have the following guides for the same router: