Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Linksys BEFSX41

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

If you have been trying to login to the Linksys BEFSX41v1.44 router and been unable to? It might be time to consider a reset.

The terms reset and reboot mean different things yet these two terms are used interchangeably. In this guide when I use the term reboot I am only referring to a cycle in the power to the device nothing more. When I use the term reset I am referring to a full restore of all settings back to the original factory defaults.

Warning: This means every single setting you have ever changed in the history of this router is erased. We highly recommend you make a list of all the possible settings you have changed in the past. These settings include:

  • The router's main username and password.
  • What other settings have you changed? How about port forwards or IP addresses?

Other Linksys BEFSX41 Guides

This is the reset router guide for the Linksys BEFSX41 v1.44. We also have the following guides for the same router:

Reset the Linksys BEFSX41

The first step in a reset is to locate the reset button on the outside of the device. This button should be labeled and typically looks more like a pinhole than a button. Router manufactures do this to avoid accidental resets.

router reset factory settings
This is the reset page from your Linksys BEFSX41 router.

While the router is on take a straightened paperclip or similar object and press down on the reset button until the Diag LED light on the front turns on and then off again. Once the LED light on the front goes out you can release the reset button. If you simply press and immediately release the reset button you will reboot the router instead of resetting it like you intended.

Warning: DO NOT unplug or turn off the router during the reset process. Doing so could result in permanent damage to the device.

This reset erases all personal data. It is an extremely good idea to try other methods of troubleshooting before you decide to reset the Linksys BEFSX41v1.44 router.

Login to the Linksys BEFSX41

Once you have reset the Linksys BEFSX41v1.44 router you need to login using the appropriate default values. These include the IP address, username and password. We have compiled all this information for you and included them in our Linksys BEFSX41v1.44 Login Guide.

Tip: If the defaults didn't work it is possible you didn't hold the reset button down for the entire amount of time.

Change Your Password

Once you are done with this login you should change the default password to the router interface. Use the Choosing a Strong Password guide to help you.

Tip: To avoid losing this password in the future try writing it down on a piece of paper and sticking it to the bottom of the device for next time.

Linksys BEFSX41 Help

Be sure to check out our other Linksys BEFSX41 info that you might be interested in.

This is the reset router guide for the Linksys BEFSX41 v1.44. We also have the following guides for the same router: