Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Linksys WET11v2

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

Have you been trying to login to the Linksys WET11v2 router without success? It might be time to consider a reset.

In this guide when I use the term reset I do not mean a reboot. When you reboot a router you cycle the power to the unit. When you reset a router you take all the settings and return them all to factory defaults. This means all your personal data is lost.

Warning: Resetting the router is a big step and should not be taken lightly. We strongly recommend trying other troubleshooting methods before you continue with this reset. I also recommend making a list of all the possible settings you have changed in the past. These settings should include:

  • The router's main username and password.
  • The network information such as the SSID and the Internet password.
  • Are you resetting a DSL router? Make sure you re-enter the Internet Service Provider (ISP) username and password. Call your ISP for these details.
  • What other settings have you changed in the past? Have you made any port forwards or IP address changes? Make sure to write these down as well.

Other Linksys WET11v2 Guides

This is the reset router guide for the Linksys WET11v2. We also have the following guides for the same router:

Reset the Linksys WET11v2

The very first step in this reset is to find the reset button. For the Linksys WET11v2 router you can find it on the back panel. Take a look at the image below.

router reset factory settings
This is the reset page from your Linksys WET11v2 router.

While the router is on take a straightened paperclip or other similar object and press down on the reset button for about 10 seconds. This starts the reset process. If you don't hold the reset button down for long enough you end up only rebooting the router instead of resetting it like you planned.

Warning: DO NOT unplug or turn off the router during the reset process. Doing so could result in permanent damage to the device.

Remember this reset erases every single setting you have ever changed in the past. I strongly recommend trying other methods of troubleshooting before you continue with this reset.

Login to the Linksys WET11v2

Following the router reset you will need to login to your Linksys WET11v2 router. This can be accomplished by using the default IP address, password, and username. You can find this information in our Login Guide for the Linksys WET11v2 router.

Tip: Unable to login with the defaults? The router might have not been properly reset. Try resetting it again but this time hold down the reset button for a little longer.

Change Your Password

Once you successfully login to your router you should change the password from the default as soon as possible. Doing so will help make your router more secure. Check out our Choosing a Strong Password guide for helpful advice on making a good password.

Tip: Keep from losing your password by writing it down on some paper and attaching it to the base of the router.

Setup WiFi on the Linksys WET11v2

The next step is to secure your wireless network. This can be done by configuring the WiFi settings on your router. Visit our Linksys WET11v2 WiFi Instructions to get started on this important step.

Linksys WET11v2 Help

Be sure to check out our other Linksys WET11v2 info that you might be interested in.

This is the reset router guide for the Linksys WET11v2. We also have the following guides for the same router: