Here I will describe how to reset the Linksys WPS54G router back to factory defaults. There seems to be a lot of confusion between a reset and a reboot.
A reboot is a cycle to the power of the router.
A reset is a full factory restore of all settings.
Warning: A reset erases all your personal data. To avoid this you must try to solve your problem with other methods of troubleshooting. I also recommend making a list of all the possible settings you have changed in the past. These should include:
- The router's main username and password.
- The WiFi SSID and password.
- If this is a DSL router you need to re-enter the ISP (Internet Service Provider) username and password. Call your ISP for these details.
- What other settings need to written down?
Other Linksys WPS54G Guides
This is the reset router guide for the Linksys WPS54G. We also have the following guides for the same router:
- Linksys WPS54G - How to change the IP Address on a Linksys WPS54G router
- Linksys WPS54G - Linksys WPS54G User Manual
- Linksys WPS54G - Linksys WPS54G Login Instructions
- Linksys WPS54G - Setup WiFi on the Linksys WPS54G
- Linksys WPS54G - Linksys WPS54G Screenshots
- Linksys WPS54G - Information About the Linksys WPS54G Router
Reset the Linksys WPS54G
Use a VPN
Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
Looking at the image below you can see the reset button on the right side. I have circled it for you in red.
First, make sure the router is plugged in and turned on. Then take a ball point pen and press down on the reset button for about 10 seconds. This starts the reset process which sometimes takes upwards of several minutes to complete. If you don't hold this button down for the full 10 seconds you might end up rebooting the router instead of resetting it like you planned.
Warning: DO NOT unplug or turn off the router during the reset process. This could cause permanent damage to the device.
Remember a reset like this one erases every single setting you have ever changed in the past. I strongly advise you to try other methods of troubleshooting before you continue with this reset.
Login to the Linksys WPS54G
Now that your Linksys WPS54G router has finished resetting you will need to login to it. To do this you will need the default login information. This includes the default IP address, password, and username. This information can be found in our Login Guide for the Linksys WPS54G router.
Tip: If the defaults aren't working then the router might have not been properly reset. Try resetting it again but this time hold down the reset button for a little longer.
Change Your Password
After you login to the router you should consider changing the password as soon as possible. Default passwords are easy to guess which makes them terrible passwords. Try to make your new password unique. Visit our Choosing a Strong Password guide for some helpful advice on securing your router.
Tip: Want to keep from losing your password? Write it down on a note of some kind and then attach it to the bottom of the router.
Setup WiFi on the Linksys WPS54G
The next step is to secure your wireless network. This can be done by configuring the router's WiFi settings. Our Linksys WPS54G WiFi Instructions are easy to follow and will guide you through this important process.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Linksys WPS54G Help
Be sure to check out our other Linksys WPS54G info that you might be interested in.
This is the reset router guide for the Linksys WPS54G. We also have the following guides for the same router:
- Linksys WPS54G - How to change the IP Address on a Linksys WPS54G router
- Linksys WPS54G - Linksys WPS54G User Manual
- Linksys WPS54G - Linksys WPS54G Login Instructions
- Linksys WPS54G - Setup WiFi on the Linksys WPS54G
- Linksys WPS54G - Linksys WPS54G Screenshots
- Linksys WPS54G - Information About the Linksys WPS54G Router