Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Linksys WRE54Gv3

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page I will explain how to properly reset the Linksys WRE54Gv3 router.

If you are unsure what a reset actually is then you are not alone. Router manufacturers use the term reset to mean both a reset and a reboot. In this guide when I use the term reset I mean a full restore of all the settings back to how they were from the factory. When I use the term reboot I am referring to a cycle in the power to the unit, nothing more.

Warning: This reset is a big step and should not be taken lightly. I strongly recommend making a list of all the settings you have changed in the past as they will all need to be reconfigured after the reset is finished. These settings include:

  • The router's main username and password. These are used to access your router's setup pages.
  • The wireless settings such as the SSID and the Internet password.
  • Are you resetting a DSL router? If you are you need to re-enter the Internet Service Provider (ISP) username and password. Call your ISP for these details.
  • What other settings have you changed in the past? Make sure to write them down. Don't forget port forwards, IP addresses and even parental controls.

Other Linksys WRE54Gv3 Guides

This is the reset router guide for the Linksys WRE54Gv3. We also have the following guides for the same router:

Reset the Linksys WRE54Gv3

In the image below you can see the reset button circled in red.

router reset factory settings
This is the reset page from your Linksys WRE54Gv3 router.

While the router is on take a straightened paperclip and press down on the reset button for about 10 seconds. This starts the reset process. A lot of router's use the reset button to reboot the router as well. If you don't hold the reset button down long enough you will probably simply reboot the router.

Caution: DO NOT unplug the router during the actual reset process. Doing so could cause permanent damage to the device.

I strongly recommend trying other methods of troubleshooting before you decide to reset the Linksys WRE54Gv3 router.

Login to the Linksys WRE54Gv3

After the Linksys WRE54Gv3 router has finished resetting you will be required to login to it by using the default login information. This includes the default IP address, password, and username. If you aren't sure what these are you can check them our in our Login Guide for the Linksys WRE54Gv3 router.

Tip: Unable to login with the defaults? Try resetting the router again. Make sure that you hold down the reset button for a little longer this time to ensure that the router properly resets.

Change Your Password

Once you successfully login to your router you should change the password as soon as possible. Default passwords are easy to guess and are not very secure. If you need any advice on making a secure password for your router visit our Choosing a Strong Password guide.

Tip: If you are worried about losing your password try writing it on a piece of paper for future reference and then attach it to the bottom of the router.

Setup WiFi on the Linksys WRE54Gv3

The next step is to secure your wireless network. This can be done by configuring the router's WiFi settings. For an easy to understand guide on this process follow our WiFi Instructions for the Linksys WRE54Gv3 router.

Linksys WRE54Gv3 Help

Be sure to check out our other Linksys WRE54Gv3 info that you might be interested in.

This is the reset router guide for the Linksys WRE54Gv3. We also have the following guides for the same router: