Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Linksys WRH54G

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page I will show you how to reset the Linksys WRH54G router back to factory defaults.

Are you confused by what a reset is? If so, you are not alone. A reset is often used to mean a reboot as well as an actual factory reset. In this guide when I use the term reboot I will be referring to a cycle in the power to the unit. When I use the term reset I am referring to a full restore of all the settings back to factory defaults.

Warning: When you reset a router you must understand that all your personal data is lost. I strongly recommend making a list of all the settings you have changed in the past. These setting could include:

  • The router's main username and password used to access the router setup pages.
  • The WiFi settings such as the SSID and the Internet password.
  • Is this a DSL router? If it is you must re-enter the Internet Service Provider (ISP) username and password. Call your ISP for these details.
  • What else can you think of? Don't forget port forwards, IP addresses or even parental controls.

Other Linksys WRH54G Guides

This is the reset router guide for the Linksys WRH54G. We also have the following guides for the same router:

Reset the Linksys WRH54G

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN birthday deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

Below is an image of the back panel of the router. The reset button has been circled for you.

router reset factory settings
This is the reset page from your Linksys WRH54G router.

The first step is to make sure the router is plugged in and powered on. Then with a straightened paperclip or similar object press down on the reset button for about 5 seconds. This should start the reset process. A lot of router manufacturers like to combine the reset button and the reboot button. If you don't hold the reset button down for long enough you might end up simply rebooting the router instead of resetting like you planned.

Caution: DO NOT unplug or turn off the router during the reset process. Doing so can cause permanent damage to the device.

Remember a reset like this one erases every single setting you have ever changed in the past. Please consider other options before you decide to reset the router.

Login to the Linksys WRH54G

Now that your Linksys WRH54G router has been reset it is time to login to it. To do this you will be required to use the default login information. Here at setuprouter.com we have found this information and compiled it in our Linksys WRH54G Login Guide.

Tip: Defaults not working? You might have accidentally rebooted the router instead of resetting it. Try resetting it again but this time hold down the reset button for just a little longer.

Change Your Password

After you successfully login to your router you should consider changing the password as soon as possible. The default password is easy to guess which makes it a terrible password. Try to make your new password unique and have it be 14-20 characters long. Visit our Choosing a Strong Password guide if you need any assistance in coming up with a secure password.

Tip: Want to avoid losing your password? Try writing it down on a piece of paper and attaching it to the underside of the router.

Setup WiFi on the Linksys WRH54G

Now it is time to secure your wireless network. To do this you will need to configure the router's WiFi settings. This can be done easily by following our WiFi Instructions for the Linksys WRH54G router.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Linksys WRH54G Help

Be sure to check out our other Linksys WRH54G info that you might be interested in.

This is the reset router guide for the Linksys WRH54G. We also have the following guides for the same router: