Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Linksys WRT55AG router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page shows how to change the LAN IP Address on the Linksys WRT55AG router.

Other Linksys WRT55AG Guides

This is the ip address guide for the Linksys WRT55AG v2. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Linksys WRT55AG

To get started configuring the Linksys WRT55AG LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Linksys WRT55AG, follow our Linksys WRT55AG Login Guide.

Change the LAN IP Address on a Linksys WRT55AG

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Linksys WRT55AG router.

Once you have finished logging into the Linksys WRT55AGv2, the first page you see is the Basic Setup page. This page allows you to change the general settings of the Router. This includes the IP Address, the address that your local network sees.

Configure the LAN section of your Linksys WRT55AG

router setup
This is the setup page from your Linksys WRT55AG router.

Find the four boxes labeled IP Address, and enter the new one you have chosen for your Router. We recommend the use of 192.168.1.1, just as you see here in these screenshots.

Don't change the Subnet Mask, this should remain at 255.255.255.0, the DHCP Server should also stay enabled.

When you have changed the IP Address save by clicking the Save Settings button.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Linksys WRT55AG Info

Don't forget about our other Linksys WRT55AG info that you might be interested in.

This is the ip address guide for the Linksys WRT55AG v2. We also have the following guides for the same router: