Setup Router logo in white Setup router name logo in white
Get Software

Reset the Linksys WTR54GS

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Linksys WTR54GS router back to factory default settings. This is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.

Warning: Make sure that you fully understand the following before resetting your router. When you reset your router, the following will happen.

  • The router's login credentials are reset.
  • All WiFi login information and network names are reset.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Linksys WTR54GS Guides

This is the reset router guide for the Linksys WTR54GS. We also have the following guides for the same router:

Recover Password in Linksys WTR54GS

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Linksys WTR54GS

There is usually a small reset button located on either the back or the bottom of a router. Look for something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Keep in mind that this will completely reset your Linksys WTR54GS router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Linksys WTR54GS

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our WTR54GS Login Guide to find all of the information that you need.

Change Your Password

You need to change your router's default password after you log in for the first time. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Linksys WTR54GS Guides

This isn't our only Linksys WTR54GS guide. We also have the following guides for this router.

This is the reset router guide for the Linksys WTR54GS. We also have the following guides for the same router: