Setup Router logo in white Setup router name logo in white
Get Software

Reset the Motorola 3347

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Motorola 3347 router. This is not the same thing as rebooting a router. Unplugging a router from the wall reboots it. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: This is not a step to be taken lightly. The following settings in your router will be changed:

  • The router's username and password are reset.
  • All WiFi settings are reset, including network name and password.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Motorola 3347 Guides

This is the reset router guide for the Motorola 3347 Qwest. We also have the following guides for the same router:

Recover Password in Motorola 3347

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Motorola 3347

Most routers have a small button on either the back or the bottom. Most reset buttons look like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will totally reset your Motorola 3347 router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Motorola 3347

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a 3347 Login Guide with all this information ready for you.

Change Your Password

Be sure to change your router's default password after you get logged back in. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Motorola 3347 Guides

If you want additional help with your Motorola 3347 be sure to check out some of our other guides.

This is the reset router guide for the Motorola 3347 Qwest. We also have the following guides for the same router: