How to change the IP Address on a Netcomm 3G42W-MB router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Netcomm 3G42W-MB router.

Other Netcomm 3G42W-MB Guides

This is the ip address guide for the Netcomm 3G42W-MB. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Netcomm 3G42W-MB

To get started configuring the Netcomm 3G42W-MB LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Netcomm 3G42W-MB, follow our Netcomm 3G42W-MB Login Guide.

Change the LAN IP Address on a Netcomm 3G42W-MB

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Netcomm 3G42W-MB router.

Now that you have logged into the NetComm 3G42W-MB you see the Home page. When you need to change your IP Address, the address you see from inside your network, click Advanced Settings, then LAN.

Configure the LAN section of your Netcomm 3G42W-MB

router setup
This is the setup page from your Netcomm 3G42W-MB router.

Next, find the box labeled IP Address. Enter your new address you have chosen for your Router in this box. Our suggestion is to use an address such as 192.168.0.1

Make sure to leave the Subnet Mask at 255.255.255.0

When you have finished making these changes to your Router, you will need to save.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Netcomm 3G42W-MB Info

Don't forget about our other Netcomm 3G42W-MB info that you might be interested in.

This is the ip address guide for the Netcomm 3G42W-MB. We also have the following guides for the same router: