This page shows how to change the LAN IP Address on the Netcomm NB6 Plus 4 router.
Other Netcomm NB6 Plus 4 Guides
This is the ip address guide for the Netcomm NB6 Plus 4. We also have the following guides for the same router:
- Netcomm NB6 Plus 4 - Reset the Netcomm NB6 Plus 4
- Netcomm NB6 Plus 4 - Netcomm NB6 Plus 4 User Manual
- Netcomm NB6 Plus 4 - Netcomm NB6 Plus 4 Login Instructions
- Netcomm NB6 Plus 4 - How to change the DNS settings on a Netcomm NB6 Plus 4 router
- Netcomm NB6 Plus 4 - Information About the Netcomm NB6 Plus 4 Router
- Netcomm NB6 Plus 4 - Netcomm NB6 Plus 4 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Netcomm NB6 Plus 4
To get started configuring the Netcomm NB6 Plus 4 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Netcomm NB6 Plus 4, follow our Netcomm NB6 Plus 4 Login Guide.
Change the LAN IP Address on a Netcomm NB6 Plus 4
If you followed our login guide above then you should see this screen.
After you have logged into the NetComm NB6Plus4 you should begin on the Device Information page. To change the IP Address, the address you see while inside your private network, click the Advanced choice at the top of the screen. Then, click Local Network, on the left in the black bar. This opens up some new choices, click the one labeled IP Address.
Configure the LAN section of your Netcomm NB6 Plus 4
You are now on the LAN IP Address Configuration page. Place your cursor in the box labeled Primary IP Address and enter the new address you have chosen for your Router. One good suggestion would be to use the one you see here, 192.168.1.1
Don't change the Subnet Mask, this should, in most cases, remain at 255.255.255.0
You need to click the Apply button when you have finished making changes to your Router.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Netcomm NB6 Plus 4 Info
Don't forget about our other Netcomm NB6 Plus 4 info that you might be interested in.
This is the ip address guide for the Netcomm NB6 Plus 4. We also have the following guides for the same router:
- Netcomm NB6 Plus 4 - Reset the Netcomm NB6 Plus 4
- Netcomm NB6 Plus 4 - Netcomm NB6 Plus 4 User Manual
- Netcomm NB6 Plus 4 - Netcomm NB6 Plus 4 Login Instructions
- Netcomm NB6 Plus 4 - How to change the DNS settings on a Netcomm NB6 Plus 4 router
- Netcomm NB6 Plus 4 - Information About the Netcomm NB6 Plus 4 Router
- Netcomm NB6 Plus 4 - Netcomm NB6 Plus 4 Screenshots