Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netcomm NB6 Plus 4

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

In this article, you will learn how to reset your Netcomm NB6 Plus 4 back to factory settings. This is not the same thing as rebooting a router. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.

  • The router's login credentials are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Netcomm NB6 Plus 4 Guides

This is the reset router guide for the Netcomm NB6 Plus 4. We also have the following guides for the same router:

Recover Password in Netcomm NB6 Plus 4

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Netcomm NB6 Plus 4

Most routers have a small button on either the back or the bottom. Look at your router and try to find something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the button is under a pinhole, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Don't forget, this step will totally reset your Netcomm NB6 Plus 4 router back to factory settings.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netcomm NB6 Plus 4

After you are finished resetting your router, you need to login in using the original factory username and password. We have a NB6 Plus 4 Login Guide with all this information ready for you.

Change Your Password

After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Netcomm NB6 Plus 4 Guides

If you want additional help with your Netcomm NB6 Plus 4 be sure to check out some of our other guides.

This is the reset router guide for the Netcomm NB6 Plus 4. We also have the following guides for the same router: