If you need to reset your Netcomm NF12 router back to factory settings, then this article shows you how. This is not the same thing as rebooting a router. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.
- The router's login and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Netcomm NF12 Guides
This is the reset router guide for the Netcomm NF12. We also have the following guides for the same router:
Recover Password in Netcomm NF12
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Netcomm NF12
Most of the time you can find a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Remember, this will erase everything you have previously done to this Netcomm NF12 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Netcomm NF12
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a NF12 Login Guide with all this information ready for you.
Change Your Password
After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Netcomm NF12 Guides
If you want additional help with your Netcomm NF12 be sure to check out some of our other guides.
This is the reset router guide for the Netcomm NF12. We also have the following guides for the same router: