Reset the Netcomm NF18ACV

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 5 minutes

In this article, you will learn how to reset your Netcomm NF18ACV back to factory settings. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:

  • The router's username and password are reset.
  • All WiFi settings are reset, including network name and password.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Netcomm NF18ACV Guides

This is the reset router guide for the Netcomm NF18ACV NC2-R6B017.EN. We also have the following guides for the same router:

Recover Password in Netcomm NF18ACV

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Netcomm NF18ACV

Most routers have a small button on either the back or the bottom. This is what a typical reset button looks like:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You can hold the button down as long as you like, it will not hurt anything.

Remember, this will totally reset your Netcomm NF18ACV router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netcomm NF18ACV

Now you need to log in using the factory default username and password. Just follow our NF18ACV Login Guide to find all of the information that you need.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Netcomm NF18ACV Guides

Here are some of our other Netcomm NF18ACV guides that you might be interested in.

This is the reset router guide for the Netcomm NF18ACV NC2-R6B017.EN. We also have the following guides for the same router: