This page shows how to change the DNS settings on the NetComm NP805N-11n router.
When you connect a router to the Internet it gets a few settings from your ISP automatically. One of the settings that the ISP sets in your router is the DNS setting. DNS stands for Domain Name System and it is used to convert Internet names into actual IP addresses. For instance, when you go to "google.com", your are really connecting to an IP address that is mapped through DNS to a number such as:
This mapping happens automatically every time you visit any page on the Internet.
Some ISPs choose to abuse the DNS system and map unknown names to servers that they control. This can be done in a way that you don't know it is happening since your router is getting its DNS settings from your ISP. For instance, if you have one of these ISPs who is hijacking your DNS, and you try to surf the web to "some-random-site.com" and "some-random-site.com" does not exist, you might get a page back from your ISP with local advertisements on it.
By changing your DNS setting in your router you will effectively change the DNS setting for every computer on your network. This is because when a device is connected to your network your router automatically hands out its own DNS settings to that device. This way you can protect your entire network from ISP hijacking with just one setting.
When you change the DNS settings in your router, you usually have to enter a Primary and a Secondary setting. The secondary is only used if the primary can not be located. Here are common settings:
If you want to use Google Public DNS, use the following settings:
If you want to use OpenDNS, use the following settings:
To get started configuring the NetComm NP805N-11n DNS page you need to login to your router. If you are already logged in you can skip this step.
To login to the NetComm NP805N-11n, follow our NetComm NP805N-11n Login Guide.
If you followed our login guide above then you should see this screen.
You are going to begin on the Status page of the NetComm NP805N-11n router. To change the Domain Name System (DNS) settings, click the choice at the top of the page labeled Network Setup. At this point a pop-up window may appear, click Network Setup from this window.
You are directed to a page similar to the one you see here.
Scroll down this page until you see Primary DNS. Enter the primary address of the DNS server you want to use here. This address is always going to be accessed first.
Next is the Secondary DNS. In this box enter the secondary address of that same DNS server you plan on using. Remember that this address is only used when the first can't be located.
Scroll down to the bottom of the page and click the Save button.
You did it!
Most devices on your network will not begin using the new DNS settings until they have been rebooted. After rebooting a device you can go to it's network settings and verify that it is using the DNS servers that you specified.
Don't forget about our other NetComm NP805N-11n info that you might be interested in.