Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear B90-755025-15

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Netgear B90-755025-15 router back to factory default settings. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.

  • The router's username and password are reset.
  • Your WiFi name and password are reset.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Netgear B90-755025-15 Guides

This is the reset router guide for the Netgear B90-755025-15 06.04.33 AT&T. We also have the following guides for the same router:

Recover Password in Netgear B90-755025-15

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Netgear B90-755025-15

Most of the time you can find a small reset button located on either the back or the bottom of a router. Look for something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will totally reset your Netgear B90-755025-15 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netgear B90-755025-15

Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our B90-755025-15 Login Guide has all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Netgear B90-755025-15 Guides

If you want additional help with your Netgear B90-755025-15 be sure to check out some of our other guides.

This is the reset router guide for the Netgear B90-755025-15 06.04.33 AT&T. We also have the following guides for the same router: