Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear C7800

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

If you need to reset your Netgear C7800 router back to factory settings, then this article shows you how. A router reset is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Before you continue, there are a few things you need to know. The following settings in your router will be changed:

  • The router's username and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Netgear C7800 Guides

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN birthday deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the Netgear C7800 v6.01.07. We also have the following guides for the same router:

Recover Password in Netgear C7800

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Netgear C7800

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN birthday deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Most routers have a small button on either the back or the bottom. A typical reset button looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Don't forget, this step will totally reset your Netgear C7800 router back to factory settings.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Netgear C7800

After you are finished resetting your router, you need to login in using the original factory username and password. Our C7800 Login Guide has all of the information that you need.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Netgear C7800 Guides

Here are some of our other Netgear C7800 guides that you might be interested in.

This is the reset router guide for the Netgear C7800 v6.01.07. We also have the following guides for the same router: