This page shows how to change the LAN IP Address on the Netgear CG814GCMR router.
Other Netgear CG814GCMR Guides
This is the ip address guide for the Netgear CG814GCMR. We also have the following guides for the same router:
- Netgear CG814GCMR - Netgear CG814GCMR User Manual
- Netgear CG814GCMR - Netgear CG814GCMR Login Instructions
- Netgear CG814GCMR - How to change the DNS settings on a Netgear CG814GCMR router
- Netgear CG814GCMR - Setup WiFi on the Netgear CG814GCMR
- Netgear CG814GCMR - Information About the Netgear CG814GCMR Router
- Netgear CG814GCMR - Netgear CG814GCMR Screenshots
- Netgear CG814GCMR - Reset the Netgear CG814GCMR
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Netgear CG814GCMR
To get started configuring the Netgear CG814GCMR LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Netgear CG814GCMR, follow our Netgear CG814GCMR Login Guide.
Change the LAN IP Address on a Netgear CG814GCMR
If you followed our login guide above then you should see this screen.
When you need to change your IP Address, the address you see from inside your private network, first you need to log into the Netgear CG814GCMR. This places you on the Gateway Status page. Next, click the choice on the left side-bar labeled LAN IP, this is under the Advanced heading.
Configure the LAN section of your Netgear CG814GCMR
Once on this new page, place your cursor in the first of four boxes labeled LAN IP Address. This is where you need to enter your new address you have chosen for your Router. One good address is 192.168.0.1, such as the one in this screenshot.
Leave the DHCP Server marked as yes, this allows the Router to choose these for you.
Click the Apply button when you are done.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Netgear CG814GCMR Info
Don't forget about our other Netgear CG814GCMR info that you might be interested in.
This is the ip address guide for the Netgear CG814GCMR. We also have the following guides for the same router:
- Netgear CG814GCMR - Netgear CG814GCMR User Manual
- Netgear CG814GCMR - Netgear CG814GCMR Login Instructions
- Netgear CG814GCMR - How to change the DNS settings on a Netgear CG814GCMR router
- Netgear CG814GCMR - Setup WiFi on the Netgear CG814GCMR
- Netgear CG814GCMR - Information About the Netgear CG814GCMR Router
- Netgear CG814GCMR - Netgear CG814GCMR Screenshots
- Netgear CG814GCMR - Reset the Netgear CG814GCMR