If you need to reset your Netgear FSM7328 router back to factory settings, then this article shows you how. A router reset is very different than a router reboot. A reboot happens every time a router loses power. A Router Reset completely erases the router and returns it to factory settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:
- The router's login and password are reset.
- Your WiFi name and password are reset.
- All ISP settings will reset to default, and you may have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Netgear FSM7328 Guides
This is the reset router guide for the Netgear FSM7328. We also have the following guides for the same router:
Recover Password in Netgear FSM7328
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Netgear FSM7328
There is usually a small reset button located on either the back or the bottom of a router. Look for something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Don't forget, this step will totally reset your Netgear FSM7328 router back to factory settings.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Netgear FSM7328
Now you need to log in using the factory default username and password. You can find all of the information that you need in our FSM7328 Login Guide.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Netgear FSM7328 Guides
Here are some of our other Netgear FSM7328 guides that you might be interested in.
This is the reset router guide for the Netgear FSM7328. We also have the following guides for the same router: