Netgear JNR1010v2 Login Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This guide shows you exactly how to login to the Netgear JNR1010v2 router.

Other Netgear JNR1010v2 Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the Netgear JNR1010v2. We also have the following guides for the same router:

Find Your Netgear JNR1010v2 Router IP Address

Before you can log in to your Netgear JNR1010v2 router, you need to figure out it's internal IP address.

Known JNR1010v2 IP Addresses
192.168.10.1
192.168.1.1

Pick one of these IP addresses and then follow the rest of this guide.

If later on in this guide you do not find your router using the IP address that you pick, then you can try different IP addresses until you get logged in. I will not hurt anything to try different IP addresses.

If you try all of the above IP addresses and still cannot find your router, then you have the following options:

Once you have the internal IP Address of your router, you can log in to it.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the Netgear JNR1010v2 Router

The Netgear JNR1010v2 is managed through a web-based interface. In order to log in to it, you need to use a web browser, such as Chrome, Firefox, or Edge.

Enter Netgear JNR1010v2 Internal IP Address

Put the internal IP Address of your Netgear JNR1010v2 in the address bar of your web browser. Your address bar should look something like this:

Press the Enter key on your keyboard. You will see a window asking for your Netgear JNR1010v2 password.

Netgear JNR1010v2 Default Username and Password

In order to login to your Netgear JNR1010v2 you are going to need to know your username and password. Just in case the router's username and password have never been changed, you may want to try the factory defaults. All of the default usernames and passwords for the Netgear JNR1010v2 are listed below.

Netgear JNR1010v2 Default Usernames and Passwords
UsernamePassword
adminpassword

Enter your username and password in the dialog box that pops up. Put your username and password in the appropriate boxes.

Netgear JNR1010v2 login screen

Netgear JNR1010v2 Home Screen

When you get logged in you should be at the Netgear JNR1010v2 home screen, which looks similar to this:

router status mac address internet IP
This is the status page from your Netgear JNR1010v2 router.

If you see this screen, then congratulations, you are now logged in to your Netgear JNR1010v2. You are now ready to follow one of our other guides.

Solutions To Netgear JNR1010v2 Login Problems

Here are some ideas to help if you are having problems getting logged in to your router.

Netgear JNR1010v2 Password Doesn't Work

It's possible that your router's factory default password is different than what we have listed. You can try other Netgear passwords. Head over to our list of all Netgear Passwords.

Forgot Password to Netgear JNR1010v2 Router

If your ISP provided your router, then you may have to call them and ask them if they know how to login to your router. Sometimes they will have your password on file.

How to Reset the Netgear JNR1010v2 Router To Default Settings

As a last resort, you can reset your router to factory defaults. Our How To Reset your Router guide can help you reset your router to factory defaults.

Other Netgear JNR1010v2 Guides

Here are some of our other Netgear JNR1010v2 info that you might be interested in.

This is the login guide for the Netgear JNR1010v2. We also have the following guides for the same router: