This page shows how to change the LAN IP Address on the Netgear MBR1210 router.
Other Netgear MBR1210 Guides
This is the ip address guide for the Netgear MBR1210. We also have the following guides for the same router:
- Netgear MBR1210 - Netgear MBR1210 User Manual
- Netgear MBR1210 - Netgear MBR1210 Login Instructions
- Netgear MBR1210 - How to change the DNS settings on a Netgear MBR1210 router
- Netgear MBR1210 - Setup WiFi on the Netgear MBR1210
- Netgear MBR1210 - Information About the Netgear MBR1210 Router
- Netgear MBR1210 - Netgear MBR1210 Screenshots
- Netgear MBR1210 - Reset the Netgear MBR1210
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Netgear MBR1210
To get started configuring the Netgear MBR1210 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Netgear MBR1210, follow our Netgear MBR1210 Login Guide.
Change the LAN IP Address on a Netgear MBR1210
If you followed our login guide above then you should see this screen.
Once you have logged into the Netgear MBR1210 you see the Main Menu, this is the Router Status screen. To change your IP Address, the address you see from inside your network, find the choice on the left, in the dark blue bar, labeled LAN Setup.
Configure the LAN section of your Netgear MBR1210
Clicking that choice takes you to the LAN Setup page. Place your cursor in the first of four boxes labeled IP Address. This is where you need to enter your new address you have chosen for your Router. One good choice is the address of 192.168.1.1
Please leave the Subnet Mask at 255.255.255.0
When you have finished making these changes to the Router, click the Apply button.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Netgear MBR1210 Info
Don't forget about our other Netgear MBR1210 info that you might be interested in.
This is the ip address guide for the Netgear MBR1210. We also have the following guides for the same router:
- Netgear MBR1210 - Netgear MBR1210 User Manual
- Netgear MBR1210 - Netgear MBR1210 Login Instructions
- Netgear MBR1210 - How to change the DNS settings on a Netgear MBR1210 router
- Netgear MBR1210 - Setup WiFi on the Netgear MBR1210
- Netgear MBR1210 - Information About the Netgear MBR1210 Router
- Netgear MBR1210 - Netgear MBR1210 Screenshots
- Netgear MBR1210 - Reset the Netgear MBR1210