Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear Nighthawk M1 MR1100

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This is the reset guide for the Netgear Nighthawk M1 MR1100 router. This is not the same thing as rebooting a router. Every time your router loses power it reboots. A Router Reset completely erases the router and returns it to factory settings.

Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.

  • The router's login credentials are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Netgear Nighthawk M1 MR1100 Guides

This is the reset router guide for the Netgear Nighthawk M1 MR1100 NTG9X50C_12.06.39.00 AT&T. We also have the following guides for the same router:

Recover Password in Netgear Nighthawk M1 MR1100

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Netgear Nighthawk M1 MR1100

There is usually a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not worry about holding the button down too long; this is harmless.

Don't forget, this step will totally reset your Netgear Nighthawk M1 MR1100 router back to factory settings.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netgear Nighthawk M1 MR1100

Once the reset is complete, you need to login to your router using the default IP address, username, and password. Just follow our Nighthawk M1 MR1100 Login Guide to find all of the information that you need.

Change Your Password

Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Netgear Nighthawk M1 MR1100 Guides

This isn't our only Netgear Nighthawk M1 MR1100 guide. We also have the following guides for this router.

This is the reset router guide for the Netgear Nighthawk M1 MR1100 NTG9X50C_12.06.39.00 AT&T. We also have the following guides for the same router: