Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear Nighthawk M1 MR1100

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This guide shows you how to reset your Netgear Nighthawk M1 MR1100 router to factory default settings. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:

  • The router's username and password are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Netgear Nighthawk M1 MR1100 Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the Netgear Nighthawk M1 MR1100 NTG9X50C_12.04.02.00 Ooredoo. We also have the following guides for the same router:

Recover Password in Netgear Nighthawk M1 MR1100

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

A router reset should be the last thing you try if you are unable to login.

Reset the Netgear Nighthawk M1 MR1100

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN birthday deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Remember, this will totally reset your Netgear Nighthawk M1 MR1100 router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Netgear Nighthawk M1 MR1100

Now you need to log in using the factory default username and password. You can follow the Nighthawk M1 MR1100 Login Guide to find everything that you need to log in.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Netgear Nighthawk M1 MR1100 Guides

Here are some of our other Netgear Nighthawk M1 MR1100 guides that you might be interested in.

This is the reset router guide for the Netgear Nighthawk M1 MR1100 NTG9X50C_12.04.02.00 Ooredoo. We also have the following guides for the same router: