This guide shows you how to reset your Netgear Orbi RBR40 router to factory default settings. A router reset is a much bigger deal than a router reboot. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:
- The router's username and password are reset to factory defaults.
- Your WiFi name and password are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Netgear Orbi RBR40 Guides
This is the reset router guide for the Netgear Orbi RBR40 v2.3.5.30. We also have the following guides for the same router:
- Netgear Orbi RBR40 v2.3.5.30 - Netgear Orbi RBR40 Screenshots
- Netgear Orbi RBR40 v2.3.5.30 - Information About the Netgear Orbi RBR40 Router
- Netgear Orbi RBR40 v2.3.5.30 - Login to the Netgear Orbi RBR40
Recover Password in Netgear Orbi RBR40
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Netgear Orbi RBR40
You can usually find a small reset button on either the back or the bottom of a router. Look at your router and try to find something that looks like this:
Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Remember, this will erase everything you have previously done to this Netgear Orbi RBR40 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Netgear Orbi RBR40
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a Orbi RBR40 Login Guide with all this information ready for you.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Netgear Orbi RBR40 Guides
This isn't our only Netgear Orbi RBR40 guide. We also have the following guides for this router.
This is the reset router guide for the Netgear Orbi RBR40 v2.3.5.30. We also have the following guides for the same router:
- Netgear Orbi RBR40 v2.3.5.30 - Netgear Orbi RBR40 Screenshots
- Netgear Orbi RBR40 v2.3.5.30 - Information About the Netgear Orbi RBR40 Router
- Netgear Orbi RBR40 v2.3.5.30 - Login to the Netgear Orbi RBR40