If you need to reset your Netgear Orbi RBR40 router back to factory settings, then this article shows you how. This is not the same thing as rebooting a router. A reboot happens every time a router loses power. A Router Reset completely erases the router and returns it to factory settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.
- The router's username and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Netgear Orbi RBR40 Guides
This is the reset router guide for the Netgear Orbi RBR40 v2.6.1.36 (DA). We also have the following guides for the same router:
- Netgear Orbi RBR40 v2.3.5.30 - Netgear Orbi RBR40 Screenshots
- Netgear Orbi RBR40 v2.3.5.30 - Information About the Netgear Orbi RBR40 Router
- Netgear Orbi RBR40 v2.3.5.30 - Reset the Netgear Orbi RBR40
- Netgear Orbi RBR40 v2.3.5.30 - Login to the Netgear Orbi RBR40
Recover Password in Netgear Orbi RBR40
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Netgear Orbi RBR40
Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Don't forget, this step will totally reset your Netgear Orbi RBR40 router back to factory settings.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Netgear Orbi RBR40
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the Orbi RBR40 Login Guide to find everything that you need to log in.
Change Your Password
Be sure to change your router's default password after you get logged back in. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Netgear Orbi RBR40 Guides
We have collected a lot of information about the Netgear Orbi RBR40 router. You can find some of our additional content here.
This is the reset router guide for the Netgear Orbi RBR40 v2.6.1.36 (DA). We also have the following guides for the same router:
- Netgear Orbi RBR40 v2.3.5.30 - Netgear Orbi RBR40 Screenshots
- Netgear Orbi RBR40 v2.3.5.30 - Information About the Netgear Orbi RBR40 Router
- Netgear Orbi RBR40 v2.3.5.30 - Reset the Netgear Orbi RBR40
- Netgear Orbi RBR40 v2.3.5.30 - Login to the Netgear Orbi RBR40