Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear R6700v3

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This article covers how to reset the Netgear R6700v3 router back to factory default settings. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: This is not a step to be taken lightly. A router reset will affect the following settings:

  • The router's login credentials are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Netgear R6700v3 Guides

This is the reset router guide for the Netgear R6700v3 v1.0.4.84_10.0.58. We also have the following guides for the same router:

Recover Password in Netgear R6700v3

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Netgear R6700v3

Most routers have a small button on either the back or the bottom. Look at your router and try to find something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for 10 seconds and watch the lights. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not worry about holding the button down too long; this is harmless.

Remember, this will totally reset your Netgear R6700v3 router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netgear R6700v3

Now you need to log in using the factory default username and password. We have a R6700v3 Login Guide with all this information ready for you.

Change Your Password

After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Netgear R6700v3 Guides

Here are some of our other Netgear R6700v3 guides that you might be interested in.

This is the reset router guide for the Netgear R6700v3 v1.0.4.84_10.0.58. We also have the following guides for the same router: