Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear WGT624

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 5 minutes

This guide shows you how to reset your Netgear WGT624 router. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings will be changed in your router:

  • The router's login and password are reset.
  • Your WiFi name and password are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Netgear WGT624 Guides

This is the reset router guide for the Netgear WGT624 v2. We also have the following guides for the same router:

Recover Password in Netgear WGT624

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Netgear WGT624

Usually there is a reset button located on the back or bottom of a router. What you are looking for is something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Just don't forget that this will totally reset your Netgear WGT624 router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Netgear WGT624

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our WGT624 Login Guide has all of the information that you need.

Change Your Password

Be sure to change your router's default password after you get logged back in. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Netgear WGT624 Guides

If you want additional help with your Netgear WGT624 be sure to check out some of our other guides.

This is the reset router guide for the Netgear WGT624 v2. We also have the following guides for the same router: