Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear WGXB102

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Netgear WGXB102 router. This is not the same thing as rebooting a router. Every time your router loses power it reboots. However, when you reset a router you, return it back to its factory default settings.

Warning: This is not a step to be taken lightly. The following settings will be changed in your router:

  • The router's login and password are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Netgear WGXB102 Guides

This is the reset router guide for the Netgear WGXB102. We also have the following guides for the same router:

Recover Password in Netgear WGXB102

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Netgear WGXB102

Most of the time you can find a small reset button located on either the back or the bottom of a router. What you are looking for is something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Don't forget, this step will totally reset your Netgear WGXB102 router back to factory settings.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netgear WGXB102

Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a WGXB102 Login Guide with all this information ready for you.

Change Your Password

You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Netgear WGXB102 Guides

This isn't our only Netgear WGXB102 guide. We also have the following guides for this router.

This is the reset router guide for the Netgear WGXB102. We also have the following guides for the same router: