Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear WNDR4300v2

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

In this article, you will learn how to reset your Netgear WNDR4300v2 back to factory settings. This is not the same thing as rebooting a router. Unplugging a router from the wall reboots it. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:

  • The router's username and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Netgear WNDR4300v2 Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the Netgear WNDR4300v2 v1.0.0.26. We also have the following guides for the same router:

Recover Password in Netgear WNDR4300v2

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

A router reset should be the last thing you try if you are unable to login.

Reset the Netgear WNDR4300v2

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

You can usually find a small reset button on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Just don't forget that this will totally reset your Netgear WNDR4300v2 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netgear WNDR4300v2

After you are finished resetting your router, you need to login in using the original factory username and password. You can follow the WNDR4300v2 Login Guide to find everything that you need to log in.

Change Your Password

After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Netgear WNDR4300v2 Guides

This isn't our only Netgear WNDR4300v2 guide. We also have the following guides for this router.

This is the reset router guide for the Netgear WNDR4300v2 v1.0.0.26. We also have the following guides for the same router: