Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Netgear WNHDE111 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Netgear WNHDE111 router.

Other Netgear WNHDE111 Guides

This is the ip address guide for the Netgear WNHDE111. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Netgear WNHDE111

To get started configuring the Netgear WNHDE111 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Netgear WNHDE111, follow our Netgear WNHDE111 Login Guide.

Change the LAN IP Address on a Netgear WNHDE111

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Netgear WNHDE111 router.

Now that you have decided to change your Router IP Address, the address you see from the inside of your network, log into the Netgear WNHDE111. This takes you to the Setup Wizard page. Next, click the choice on the left labeled Network Settings.

Configure the LAN section of your Netgear WNHDE111

router setup
This is the setup page from your Netgear WNHDE111 router.

On this new page, enter the address you have chosen for your Router in the box labeled Access Point IP Address. One good option for an address is 192.168.0.1

Make sure that while making this change to your Router, you do not change the Subnet Mask, this should remain at 255.255.255.0

Make sure to leave the DHCP Server Settings alone, this enables the Router to choose from a pool of addresses when needed.

Finally, click Apply when you are done.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Netgear WNHDE111 Info

Don't forget about our other Netgear WNHDE111 info that you might be interested in.

This is the ip address guide for the Netgear WNHDE111. We also have the following guides for the same router: