Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Novatel Wireless MiFi 4082 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Novatel Wireless MiFi 4082 router.

Other Novatel Wireless MiFi 4082 Guides

This is the ip address guide for the Novatel Wireless MiFi 4082. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Novatel Wireless MiFi 4082

To get started configuring the Novatel Wireless MiFi 4082 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Novatel Wireless MiFi 4082, follow our Novatel Wireless MiFi 4082 Login Guide.

Change the LAN IP Address on a Novatel Wireless MiFi 4082

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Novatel Wireless MiFi 4082 router.

Now that you have logged into the Novatel Wireless MiFi 4082 you should see the Landing Page. Click the MiFi Administration option in the upper right corner. This takes you to the page you see above. When you need to change the Router IP Address, the address you see when inside your network, click the choice at the top labeled Router.

Configure the LAN section of your Novatel Wireless MiFi 4082

router setup
This is the setup page from your Novatel Wireless MiFi 4082 router.

This should take you to the TCP/IP page. Place your cursor in the box marked IP Address and enter the new address you have chosen here. The address you see in this screenshot is a very good choice for an address, another good one is 192.168.0.1

While you can change your Router IP Address, we suggest that you do not change the Subnet Mask, this should stay at 255.255.255.0

Make sure to save your changes before exiting.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Novatel Wireless MiFi 4082 Info

Don't forget about our other Novatel Wireless MiFi 4082 info that you might be interested in.

This is the ip address guide for the Novatel Wireless MiFi 4082. We also have the following guides for the same router: