Setup Router logo in white Setup router name logo in white
Get Software

Reset the Novatel Wireless MiFi 4620L

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This guide shows you how to reset your Novatel Wireless MiFi 4620L router to factory default settings. This is a much bigger deal than a router reboot. A reboot happens every time a router loses power. This is different from a reset because a reset completely erases all settings from the router.

Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:

  • The router's login credentials are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Novatel Wireless MiFi 4620L Guides

This is the reset router guide for the Novatel Wireless MiFi 4620L 02.01 Verizon. We also have the following guides for the same router:

Recover Password in Novatel Wireless MiFi 4620L

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Novatel Wireless MiFi 4620L

Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Don't forget, this step will totally reset your Novatel Wireless MiFi 4620L router back to factory settings.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Novatel Wireless MiFi 4620L

After you are finished resetting your router, you need to login in using the original factory username and password. You can follow the MiFi 4620L Login Guide to find everything that you need to log in.

Change Your Password

Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Novatel Wireless MiFi 4620L Guides

We have collected a lot of information about the Novatel Wireless MiFi 4620L router. You can find some of our additional content here.

This is the reset router guide for the Novatel Wireless MiFi 4620L 02.01 Verizon. We also have the following guides for the same router: