Nucom R5000UNv2 WirelessSecurity

This is the WirelessSecurity screen from the Nucom R5000UNv2 router.

Keywords on The Nucom R5000UNv2 WirelessSecurity Screenshot

The following words were detected on the Nucom R5000UNv2 WirelessSecurity screenshot.

Wireless -- Security This page allows you to configure security features of the wireless LAN interface. You may setup configuration manually          OR through WiFi Protcted Setup(WPS) Note: WPS2, When both STA PIN and Authorized MAC are empty, PBC is used. If Hide Access Point enabled or Mac filter list is empty with "allow" chosen, WPS2 will be disabled      WPS Setup        Enable WPS Enabled Disabled        WPS Version Version1.0 Version2.0        Enable Build-In Registrar Enabled Disabled        Add Client (For WPS1.0, when WPA-PSK, WPA2-PSK or OPEN mode is configured; For WPS2.0, When WPA2-PSK or Mixed WPA2/WPA-PSK is configured) Push-Button Enter STA PIN Use AP PIN              Help       Set Authorized Station MAC    Help        Set WPS AP Mode Configured Unconfigured        Setup AP (Configure all security settings with an external registar) Push-Button PIN         -->       Device PIN    Help         Manual Setup AP You can set the network authentication method, selecting data encryption, specify whether a network key is required to authenticate to this wireless network and specify the encryption strength. Click "Apply/Save" when done. Select SSID: Broadcom2 Broadcom3 Broadcom4     Network Authentication: WPA2 Preauthentication: Disabled Enabled Network Re-auth Interval: WPA/WAPI passphrase:    Click here to display WPA Group Rekey Interval: RADIUS Server IP Address: RADIUS Port: RADIUS Key: WPA/WAPI Encryption: WEP Encryption: Encryption Strength: 128-bit 64-bit Current Network Key: Network Key 1: Network Key 2: Network Key 3: Network Key 4:   Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys   Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys     WAPI Certificate Certificate Status:   ASU Certificate File: User Certificate File: