How to change the IP Address on a On Networks N150R router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the On Networks N150R router.

Other On Networks N150R Guides

This is the ip address guide for the On Networks N150R. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The On Networks N150R

To get started configuring the On Networks N150R LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the On Networks N150R, follow our On Networks N150R Login Guide.

Change the LAN IP Address on a On Networks N150R

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your On Networks N150R router.

Once you have logged into the On-Networks N150R and are on the Home page, you are ready to change your Router's IP Address, this is the address you see when inside your local network. First, click the choice at the top of the page labeled Setup.

A new list now appears on the left side of the page. Click the one labeled LAN Ports.

Configure the LAN section of your On Networks N150R

router setup
This is the setup page from your On Networks N150R router.

You are now on the correct page to change your IP Address. Under the heading of LAN TCP/IP Setup are four boxes labeled IP Address. Enter your new LAN IP Address here. We recommend using an address ending with a one, such as 10.0.0.1

Nothing else on this page should be changed. When you have finished, click the choice labeled Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other On Networks N150R Info

Don't forget about our other On Networks N150R info that you might be interested in.

This is the ip address guide for the On Networks N150R. We also have the following guides for the same router: