This page shows how to change the LAN IP Address on the Ozenda AR4505GW router.
Other Ozenda AR4505GW Guides
This is the ip address guide for the Ozenda AR4505GW. We also have the following guides for the same router:
- Ozenda AR4505GW - Reset the Ozenda AR4505GW
- Ozenda AR4505GW - Ozenda AR4505GW User Manual
- Ozenda AR4505GW - Ozenda AR4505GW Login Instructions
- Ozenda AR4505GW - How to change the DNS settings on a Ozenda AR4505GW router
- Ozenda AR4505GW - Setup WiFi on the Ozenda AR4505GW
- Ozenda AR4505GW - Information About the Ozenda AR4505GW Router
- Ozenda AR4505GW - Ozenda AR4505GW Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Ozenda AR4505GW
To get started configuring the Ozenda AR4505GW LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Ozenda AR4505GW, follow our Ozenda AR4505GW Login Guide.
Change the LAN IP Address on a Ozenda AR4505GW
If you followed our login guide above then you should see this screen.
Once you have decided to change your Router IP Address, the address you see from inside your local network, first log into the Ozenda AR4505GW. This takes you to the Status page. Next, click the choice on the left labeled LAN, then, VLAN.
Configure the LAN section of your Ozenda AR4505GW
On this new page, place your cursor in the first of the four boxes labeled IP Address, and enter your new address you have chosen for your Router. One good choice is 192.168.1.1
When you have finished making these changes, make sure to save.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Ozenda AR4505GW Info
Don't forget about our other Ozenda AR4505GW info that you might be interested in.
This is the ip address guide for the Ozenda AR4505GW. We also have the following guides for the same router:
- Ozenda AR4505GW - Reset the Ozenda AR4505GW
- Ozenda AR4505GW - Ozenda AR4505GW User Manual
- Ozenda AR4505GW - Ozenda AR4505GW Login Instructions
- Ozenda AR4505GW - How to change the DNS settings on a Ozenda AR4505GW router
- Ozenda AR4505GW - Setup WiFi on the Ozenda AR4505GW
- Ozenda AR4505GW - Information About the Ozenda AR4505GW Router
- Ozenda AR4505GW - Ozenda AR4505GW Screenshots