Setup Router logo in white Setup router name logo in white
Get Software

Reset the Pace Plc 5168NV-110

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Pace Plc 5168NV-110 router. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. However, when you reset a router you, return it back to its factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings will be changed in your router:

  • The router's login and password are reset.
  • All WiFi settings are reset, including network name and password.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Pace Plc 5168NV-110 Guides

This is the reset router guide for the Pace Plc 5168NV-110 10.5.4.527390-ht Hawaiian Telcom. We also have the following guides for the same router:

Recover Password in Pace Plc 5168NV-110

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

A router reset should be the last thing you try if you are unable to login.

Reset the Pace Plc 5168NV-110

On most routers you can find a small button on the back or the bottom labeled reset. Most reset buttons look like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for 10 seconds and watch the lights. The lights on the front of the router should do something different when the reset happens. You can hold the button down as long as you like, it will not hurt anything.

Don't forget, this step will totally reset your Pace Plc 5168NV-110 router back to factory settings.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Pace Plc 5168NV-110

Now you need to log in using the factory default username and password. You can find all of the information that you need in our 5168NV-110 Login Guide.

Change Your Password

Be sure to change your router's default password after you get logged back in. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Pace Plc 5168NV-110 Guides

We have collected a lot of information about the Pace Plc 5168NV-110 router. You can find some of our additional content here.

This is the reset router guide for the Pace Plc 5168NV-110 10.5.4.527390-ht Hawaiian Telcom. We also have the following guides for the same router: