Setup Router logo in white Setup router name logo in white
Get Software

Reset the Pace Plc 5168NV-110

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

In this article, you will learn how to reset your Pace Plc 5168NV-110 back to factory settings. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:

  • The router's login credentials are reset.
  • Your WiFi login, password, and network name are reset.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Pace Plc 5168NV-110 Guides

This is the reset router guide for the Pace Plc 5168NV-110 10.5.4527589-sasktel SaskTel. We also have the following guides for the same router:

Recover Password in Pace Plc 5168NV-110

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Pace Plc 5168NV-110

Most routers have a small button on either the back or the bottom. Look at your router and try to find something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for 10 seconds and watch the lights. The lights on the front of the router should do something different when the reset happens. Do not worry about holding the button down too long; this is harmless.

Remember, this will erase everything you have previously done to this Pace Plc 5168NV-110 router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Pace Plc 5168NV-110

Once the reset is complete, you need to login to your router using the default IP address, username, and password. Just follow our 5168NV-110 Login Guide to find all of the information that you need.

Change Your Password

You need to change your router's default password after you log in for the first time. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Pace Plc 5168NV-110 Guides

This isn't our only Pace Plc 5168NV-110 guide. We also have the following guides for this router.

This is the reset router guide for the Pace Plc 5168NV-110 10.5.4527589-sasktel SaskTel. We also have the following guides for the same router: