How to change the IP Address on a Paradigm PTI-8411 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Paradigm PTI-8411 router.

Other Paradigm PTI-8411 Guides

This is the ip address guide for the Paradigm PTI-8411 Realtek. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Paradigm PTI-8411

To get started configuring the Paradigm PTI-8411 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Paradigm PTI-8411, follow our Paradigm PTI-8411 Login Guide.

Change the LAN IP Address on a Paradigm PTI-8411

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Paradigm PTI-8411 router.

This Internal IP Address guide begins on the ADSL Router Status page of the Paradigm PTI-8411 Realtek. Begin by clicking the option in the left sidebar labeled LAN.

Configure the LAN section of your Paradigm PTI-8411

router IP address lan home network
This is the lan page from your Paradigm PTI-8411 router.

This takes you to the LAN Interface Setup page of your router. Enter your new LAN IP Address in the box labeled IP Address. When entering your new Internal IP Address, it's a good idea to end this number in a 1 such as 10.0.0.1 or 192.168.0.1

Don't make any other changes to this page, just click the Apply Changes button to make your change permanent.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Paradigm PTI-8411 Info

Don't forget about our other Paradigm PTI-8411 info that you might be interested in.

This is the ip address guide for the Paradigm PTI-8411 Realtek. We also have the following guides for the same router: