Setup Router logo in white Setup router name logo in white
Get Software

Reset the Paradigm PTI-8411

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Paradigm PTI-8411 router. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.

Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:

  • The router's login and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Paradigm PTI-8411 Guides

This is the reset router guide for the Paradigm PTI-8411 Realtek. We also have the following guides for the same router:

Recover Password in Paradigm PTI-8411

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Paradigm PTI-8411

On most routers you can find a small button on the back or the bottom labeled reset. What you are looking for is something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. You can hold the button down as long as you like, it will not hurt anything.

Remember, this will totally reset your Paradigm PTI-8411 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Paradigm PTI-8411

Once the reset is complete, you need to login to your router using the default IP address, username, and password. Just follow our PTI-8411 Login Guide to find all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Paradigm PTI-8411 Guides

This isn't our only Paradigm PTI-8411 guide. We also have the following guides for this router.

This is the reset router guide for the Paradigm PTI-8411 Realtek. We also have the following guides for the same router: