Setup Router logo in white Setup router name logo in white
Get Software

Reset the Pepwave SURF-SOHO-5026

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Pepwave SURF-SOHO-5026 router. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. However, when you reset a router you, return it back to its factory default settings.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.

  • The router's username and password are reset.
  • All WiFi login information and network names are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Pepwave SURF-SOHO-5026 Guides

This is the reset router guide for the Pepwave SURF-SOHO-5026. We also have the following guides for the same router:

Recover Password in Pepwave SURF-SOHO-5026

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Pepwave SURF-SOHO-5026

On most routers you can find a small button on the back or the bottom labeled reset. This is what a typical reset button looks like:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. It is harmless to hold the reset button too long.

Remember, this will totally reset your Pepwave SURF-SOHO-5026 router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Pepwave SURF-SOHO-5026

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our SURF-SOHO-5026 Login Guide has all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Pepwave SURF-SOHO-5026 Guides

We have collected a lot of information about the Pepwave SURF-SOHO-5026 router. You can find some of our additional content here.

This is the reset router guide for the Pepwave SURF-SOHO-5026. We also have the following guides for the same router: