This page shows how to change the LAN IP Address on the Pepwave Surf-SOHO router.
Other Pepwave Surf-SOHO Guides
This is the ip address guide for the Pepwave Surf-SOHO. We also have the following guides for the same router:
- Pepwave Surf-SOHO - Reset the Pepwave Surf-SOHO
- Pepwave Surf-SOHO - Pepwave Surf-SOHO User Manual
- Pepwave Surf-SOHO - Pepwave Surf-SOHO Login Instructions
- Pepwave Surf-SOHO - How to change the DNS settings on a Pepwave Surf-SOHO router
- Pepwave Surf-SOHO - Setup WiFi on the Pepwave Surf-SOHO
- Pepwave Surf-SOHO - Pepwave Surf-SOHO Screenshots
- Pepwave Surf-SOHO - Information About the Pepwave Surf-SOHO Router
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Pepwave Surf-SOHO
To get started configuring the Pepwave Surf-SOHO LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Pepwave Surf-SOHO, follow our Pepwave Surf-SOHO Login Guide.
Change the LAN IP Address on a Pepwave Surf-SOHO
If you followed our login guide above then you should see this screen.
After you have logged into the Pepwave Surf-SOHO you see the Dashboard page. From here, click Network located at the top of the page. Next, on the left choose the choice of Basic Settings under LAN.
Configure the LAN section of your Pepwave Surf-SOHO
On this new page, find the box labeled IP Address and enter the new address you have chosen for your Router. One good option is the address of 192.168.0.1
Nothing else needs to be changed on this page. Simply save your changes.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Pepwave Surf-SOHO Info
Don't forget about our other Pepwave Surf-SOHO info that you might be interested in.
This is the ip address guide for the Pepwave Surf-SOHO. We also have the following guides for the same router:
- Pepwave Surf-SOHO - Reset the Pepwave Surf-SOHO
- Pepwave Surf-SOHO - Pepwave Surf-SOHO User Manual
- Pepwave Surf-SOHO - Pepwave Surf-SOHO Login Instructions
- Pepwave Surf-SOHO - How to change the DNS settings on a Pepwave Surf-SOHO router
- Pepwave Surf-SOHO - Setup WiFi on the Pepwave Surf-SOHO
- Pepwave Surf-SOHO - Pepwave Surf-SOHO Screenshots
- Pepwave Surf-SOHO - Information About the Pepwave Surf-SOHO Router